6010LM RO3003 RO3035 RO3203 RO3006 RO3206 RO3010 RO3210 RO4003C RO4350B RO4403 - Datasheet Archive Standard Thickness, Tolerance and Panel Size Rogers' high frequency laminates can be purchased by contacting a Rogers Customer

Ordering Information: Standard Thickness, Tolerance and Panel Size Rogers' high frequency laminates can be purchased by contacting a Rogers Customer Service Representative at (480) 961-1382 or one of our international offices listed below. To ensure that you receive the material for your application, please include order information for each of the categories listed below. For more detailed product information, refer to the charts in this product selector guide. GRADE: Laminates - RT/duroid? 5870, 5880, 6002, 6202, 6006, 6010LM 6010LM, ULTRALAM? 2000, ULTRALAM 3000, TMM? 3,4,6,10, and 10i, RO3003 RO3003 , RO3035 RO3035 , RO3203 RO3203 , RO3006RO3006 , RO3206 RO3206 RO3010 RO3010 , RO3210 RO3210 , RO4003C RO4003C , and RO4350B RO4350B high frequency laminates. Bonding Film -3001 Prepreg - RO4403 RO4403 , RO4450B RO4450B and RO4450FRO4450F TM TM TM TM TM TM TM TM Standard Dielectric Thickness Standard Panel Sizes RO3003TM RO3003TMRO3035TM RO3035TM *RO3203TM RO3203TM 0.005" (0.127mm) ± 0.0005" 0.010" (0.254mm) ± 0.0007" 0.020" (0.508mm) ± 0.001" 0.030" (0.762mm) ± 0.0015" 0.060" (1.524mm) ± 0.003" RO3003 RO3003 12"X18" (305mm X 457mm) 24"X18" (610mm X 457mm) RO3203 RO3203, RO3035 RO3035 18"X12" (457mm X 305mm) 18"X24" (457mm X 610mm) 18"X36" (457mm X 915mm) 18"X48" (457mm X 1.219m) RO3006TM RO3006TM RO3010TMRO3010TM *RO3206TM RO3206TM *RO3210TM RO3210TM 0.005" (0.127mm) ± 0.0005" 0.010" (0.254mm) ± 0.0007" 0.025"

 (0.625mm) ± 0.001" 0.050" (1.270mm) ± 0.002" 18"X12" (457mm X 305mm) 18"X24" (457mm X 610mm) 18"X36" (457mm X 915mm) 18"X48" (457mm X 1.219m) RO4003CTM RO4003CTM 0.008" (0.203mm) ± 0.001" 0.012" (0.305mm) ± 0.001" 0.016" (0.406mm) ± 0.0015" 0.020" (0.508mm) ± 0.0015" 0.032" (0.813mm) ± 0.002" 0.060" (1.524mm) ± 0.004" 12"X18" (305mm X 457mm) 24"X18" (610mm X 457mm) RO4350BTMRO4350BTM 0.0040" (0.101mm) ± 0.0007" 0.0066" (0.168mm) ± 0.0007" 0.0100" (0.254mm) ± 0.001" 0.0133" (0.338mm) ± 0.0015" 0.0166" (0.422mm) ± 0.0015" 0.0200" (0.508mm) ± 0.0015" 0.0300" (0.762mm) ± 0.002" 0.0600" (1.524mm) ± 0.004" 12"X18" (305mm X 457mm) 24"X18" (610mm X 457mm) RT/duroid?5870 RT/duroid 5880 0.005" (0.127mm) ± 0.0005" 0.010" (0.254mm) ± 0.0007" 0.020" (0.508mm) ± 0.001" 0.031" (0.787mm) ± 0.001" 0.062" (1.570mm) ± 0.002" 0.125" (3.170mm) ± 0.004" 18"X12" (457mm X 305mm) 18"X24" (457mm X 610mm) 18"X36" (457mm X 915mm) 18"X48" (457mm X 1.219m) RT/duroid 6002 RT/duroid 6202 0.010" (0.254mm) ± 0.0007" 0.020" (0.508mm) ± 0.001" 0.030" (0.762mm) ± 0.001" 0.060" (1.524mm) ± 0.002" 18"X12" (457mm X 305mm) 18"X24" (457mm X 610mm) 18"X36" (457mm X 915mm) 18"X48" (457mm X 1.219m) RT/duroid 6006 RT/duroid 6010LM 6010LM 0.005" (0.127mm) ± 0.0005" 0.010" (0.254mm) ± 0.0007" 0.025" (0.625mm) ± 0.001" 0.050" (1.270mm) ± 0.002" 0.075" (1.905mm) ± 0.004" 0.100" (2.540mm) ± 0.005" *not availlable in 0.005" (0.127mm) *not availlable in 0.005" (0.127mm) and 0.010"(0.254mm) TM TM TM TM THICKNESS AND TOLERANCE: Laminate thickness is normally specified as the dielectric thickness without copper cladding. Custom tolerances are available on RT/duroid laminates upon request. TYPE OF FOIL CLADDING: ?, ?, 1, 2 oz. electrodeposited copper foil, ?, 1, 2 oz. rolled copper foil. TMM, RO3000 RO3000 andRO4000 RO4000 series laminates are not supplied with ? oz. electrodeposited or rolled copper foil. Some material grades may be supplied unclad. Call Rogers Customer Service Representatives for unclad options. Thick aluminum, copper and brass claddings are available on Rogers RT/duroid laminates. Thick aluminum and brass claddings are available on most TMM laminates. Thick metal cladding is not available on RO4000 RO4000 laminates. Thick aluminum, copper, and brass claddings are also available in a range of thicknesses and thickness tolerances. Other thick metal backings are available upon request. SPECIFICATION REQUIREMENTS: Standard specifications are Rogers' material specifications. Certificates of conformance are available. All other requirements must be identified at the time the order is placed. If special testing or data generation is required, additional costs may be incurred. in (mm) Product Advanced Circuit Materials High Frequency Laminates Product Selector Guide The world runs better with Rogers.? 18"X12" (457mm X 305mm) not available in 0.010" (0.254mm) 18"X24" (457 X 610mm) not available in 0.010" (0.254mm) 10"X10" (254mm X 254mm) 10"X20" (254mm X 508mm) 20"X20" (508mm X 508mm) TMM?3 TMM 4 0.015" (0.381mm) ± 0.0015" 0.020" (0.508mm) ± 0.0015" 0.030" (0.762mm) ± 0.0015" 0.060" (1.524mm) ± 0.0015" 0.125" (3.175mm) ± 0.0015" 18"X12" (457mm X 305mm) 18"X24" (457mm X 610mm) TMM 6 TMM 10 TMM 10i 0.015" (0.381mm) ± 0.0015" 0.025" (0.625mm) ± 0.0015" 0.050" (1.270mm) ± 0.0015" 0.075" (1.905mm) ± 0.0015" 0.100" (2.540mm) ± 0.0015" 18"X12" (457mm X 305mm) 18"X24" (457mm X 610mm) ULTRALAM? 3000 0.001" (0.025mm) 0.002" (0.051mm) 0.004" (0.101mm) 18"X12" (457mm X 305mm) 18"X24" (457mm X 610mm) Other thicknesses and panel sizes may be available. Contact customer service for more information. CONTACT INFORMATION: USA: Belgium: Japan: Taiwan: Korea: Singapore: China: Rogers Advanced Circuit Materials, ISO 9002 certified Rogers NV - Gent Rogers Japan Inc. Rogers Taiwan Inc. Rogers Korea Inc. Rogers Technologies Singapore Inc. Rogers (Shanghai) International Trading Co., Ltd Tel: 480-961-1382 Tel: 32-9-2353611 Tel: 81-3-5200-2700 Tel: 886-2-86609056 Tel: 82-31-716-6112 Tel: 65-747-3521 Tel: 86-21-63916088 Fax: 480-961-4533 Fax: 32-9-2353658 Fax: 81-3-5200-0571 Fax: 886-2-86609057 Fax: 82-31-716-6208 Fax: 65-747-7425 Fax: 86-21-63915060 The information contained in this product selector guide is intended to assist you in designing with Rogers' laminates. It is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or fitness for a particular purpose. The user should determine the suitability of Rogers' circuit materials for each application. These commodities, technology and software are exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law prohibited. RT/duroid, ULTRALAM, TMM, RO3000 RO3000, and RO4000 RO4000 are licensed trademarks of Rogers Corporation. The world runs better with Rogers. and the Rogers' logo are licensed trademarks of Rogers Corporation. © 1987, 1991, 1994, 1995, 1999, 2001, 2002, 2004, 2005, 2007, 2008 All Rights Reserved. Printed in USA. Revised 04/2008 0790-0408-10.0ON Publication #92-601 www.rogerscorporation.com/acm (1) Product Composition RO3003TM RO3003TM High Frequency Laminate Properties Dielectric Constant er @ 10 GHz (Typical) RO3006TM RO3006TM (7) PTFE Ceramic PTFE Ceramic 3.00 ± 0.04 6.15 ± 0.15 Dissipation Factor TAN d @ 10 GHz (Typical) Thermal (2) Coefficient of er -50°C to 150°C ppm/°C (Typical) Volume Resistivity Mohm cm (Typical) Surface Resistivity Mohm (Typical) 0.0013 13 107 0.0020 -160 103 (1) RO3010TM RO3010TM PTFE Ceramic 10.2 ± 0.30 0.0023 RO3035TM RO3035TM PTFE Ceramic 3.50± 0.05 0.0017 RO3203TM RO3203TM PTFE Ceramic Reinforced Woven Glass RO3206TM RO3206TM PTFE Ceramic Reinforced Woven Glass RO3210 RO3210 PTFE Ceramic Reinforced Woven Glass TM (7) 3.02 ± 0.04 6.15 ± 0.15 10.2 ± 0.50 -50° to 10°C -34 10°C to 150°C -11 Y Z 107 300 (2,068) 300 (2,068) 167 (1,151)